SLAB ONLY DOES NOT INCLUDE DOORSWEEP OR GLASS

The Pease Fiberglass Door with beautiful Mahogany grain detail. Replace just your door slab and keep your existing jambs and brickmold. A perfect replacement for Pease (carbon & steel) doors as well as most entry doors by Stanley, Taylor, Mastercraft, Perma Door, Castlegate, Masonite, Therma Tru, Jeld-Wen, Plastpro, and many others. Please make sure to check your measurements (door height, width, and thickness) and feel free to contact us with any measurement or fit questions.

• Highest quality wood grain fiberglass for easy finishing & durability
• Neutral tan finish that can be painted or stained, see our paint category to purchase paint/stain

Classic 6 Panel style. Looks great with or without glass. Glass options can be found in our door glass section.

Sizes & Measurements:

Style: 6 Panel

31.75" x 77" - RARE SHORT SIZE:

• Slab width: 31.75" (referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door)
• Slab height: 77.0" (6' 5" rare short size for basement and some patio applications where a full 79" or 80" tall door is too tall)
• Panel Thickness: 1.75"
• Select 6 Panel (no cut out), With Glass: Clear Half Lite (installed), With Glass: Clear Full Lite (installed), Without Glass: Half Lite 23" x 37" Cut Out, Without Glass: Full Lite 23" x 65" Cut Out

35.75" x 77" - RARE SHORT SIZE:

• Slab width: 35.75" (referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door)
• Slab height: 77.0" (6' 5" rare short size for basement and some patio applications where a full 79" or 80" tall door is too tall)
• Panel Thickness: 1.75"
• Select 6 Panel (no cut out), With Glass: Clear Half Lite (installed), With Glass: Clear Full Lite (installed), Without Glass: Half Lite 23" x 37" Cut Out, Without Glass: Full Lite 23" x 65" Cut Out

31.75" x 79":

• Slab width: 31.75" (referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door)
• Slab height: 79.0" (referred to nominally as an 80" or 6' 8" tall panel)
• Panel Thickness: 1.75"
• Select 6 Panel (no cut out), With Glass: Clear Half Lite (installed), With Glass: Clear Full Lite (installed), Without Glass: Half Lite 23" x 37" Cut Out, Without Glass: Full Lite 23" x 65" Cut Out

35.75" x 79":

• Slab width: 35.75" (referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door)
• Slab height: 79.0" (referred to nominally as an 80" or 6' 8" tall panel)
• Panel Thickness: 1.75"
• Select 6 Panel (no cut out), With Glass: Clear Half Lite (installed), With Glass: Clear Full Lite (installed), Without Glass: Half Lite 23" x 37" Cut Out, Without Glass: Full Lite 23" x 65" Cut Out

Need help measuring your rough opening? Our free SmartFit tool guides you through every measurement so you order the right size the first time. Get started → smartfit.peasedoors.com

Prep & other specifications:

• Select either No Hinge or Lock Prep or Standard Hinge & Lock Prep:
• No Hinge or Lock Prep: allows for lock placement as desired and hinge side edge unfinished and can be mortised for hinge placements as needed
• PEASE Standard Hinge & Lock Prep 77 & 79" tall doors:
• Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 37.5" to top of second hinge, 68.5" to top of bottom hinge
• Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 40.375" from the top edge of the door
• Trimming: Can trim up to 2 inches off bottom, then we recommend sealing thoroughly with caulking and capping with a U-style doorsweep. Sides and top are not trimmable. This is a replacement for most entry doors (front, kitchen, side, garage/man door, etc.) and can also often be trimmed and used as a replacement for patio doors which are typically shorter in height (contact us to discuss if you need a door that requires more than 2 inches of trimming off bottom)